iCAN Source Controllers

The iCAN source controllers from iLight are mechanically elegant, practical to use and above all safe.

They offer unrivalled choice of control, with a substantial range of options to offer the specifier, installer and user to build up any size of system in virtually any combination. All products are future proof due to their software-based structure and upgradeable firmware.

Our extensive experience in architectural lighting controls has enabled us to incorporate a wealth of small, detailed features that collectively make the best all round source controller available today.

Key features

General

• Choice of loads for high frequency ballasts, resistive, inductive, capacitive and switched loads
  
• Choice of 1, 4 or 12 channel units to match size of installation required
  
• Low noise for standard dimmers or silent operation for adaptive dimmers
  
• 128 Scene memory and fully configurable personality
  
• Fade rates of 0.1 to 60 minutes per scene
  
• RJ12 programming point
  
• iCAN network port with loop in, loop out terminals for CAT5 cable
  
• Audio Visual (RS485) port
  
• Optional DMX input
  
• Auxiliary over-ride port
• CE compliant
  

Mechanical

• Lockable hinged cover over MCB’s to prevent unauthorised access to interior
  
• Standard knock-outs to accommodate UK and European conduit
• Installation details fitted to unit exterior for ease of installation
  

Electronic

• Circuit and device protection from a choice of MCB styles to comply with most regulatory standards (single pole, double pole, neutral disconnect or terminals)
  
• Voltage and current (real-time) monitoring and shut-down
  (adaptive only)
  
• Patented “iProtect” system to protect lamps and devices from excessive in rush current and short circuit conditions (adaptive only)
  
• Emergency lighting terminals
  
• LED status indication of channel status levels, iCAN network
  watchdog and electronic bypass status
  
• Fail to full on for all units on CPU failure
  
• Test switch and electronic bypass switch
  
• Over heat protection
  

iCAN Inductive source controllers

• Dim resistive, inductive and low voltage electronic transformer loads (that are compatible with leading edge dimmers)

iCAN Adaptive source controllers

• Controller outputs can be adapted to resistive, inductive and capacitive load types
  
• Complete with iPROTECT™ lamp protection and auto short circuit protection

iCAN Combined Controllers

• Cost effective combined
  controller for inductive, HF ballast and switched loads
  
• Suitable for AV applications
  
• 4 circuits of inductive, 4 circuits of 1-10V, DSI and DALI ballast control and 4 relays for power

iCAN HF ballast source controllers

• Suitable for 1-10 volt analogue, Tridonic DSI or DALI control configurable from iCANsoft
• 230V switched relay outputs

iCAN Switched relay controllers

• Switching of resistive, inductive or capacitive lighting loads
  
• Quiet operation