Low Voltage Sensors These standard units allow the iLight system functions to be triggered automatically from a sensor. They either detect the infrared radiation given off when somebody enters an area or detect ambient lighting levels and send a signal to the iLight interface unit (UIG or UIM). All these units are powered from the iCAN network. |
|||||
 |
|||||
 |
PI1C |
Low voltage Passive Infrared Detector with open collector output, suitable for flush mounting to suspended ceilings, includes retaining clip. Detection range approx 5m from ceiling height 2.4m. May be used in groups to cover larger areas. On time duration after trigger fully programmable within iCANsoft. Interior use only.
|
 |
||
|
|||||
 |
PE1C |
Ceiling Mounted Photocell Low voltage Photocell Detector, suitable for flush mounting to suspended ceilings, includes retaining clip. May be used as a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range at surface 0-1000 lux approx. Positioned as look down detector, Interior use only. |
 |
||
|
|||||
 |
PE1EXT |
Low voltage exterior Photocell Detector, suitable for surface mounting. May be used for a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range approx 0-10,000 lux IP54 rated. |
 |
||
|
|||||
 |
AXCS01SRJ |
Combined PIR, Daylight and I/R Sensorl This low voltage multi sensor combines PIR presence detection and a photocell in one compact flush mounting design using an RJ12 connector on the rear of the unit. The action of the photocell and PIR presence detector are separate. Ideal for intelligent lighting control systems that deploy system programmed intelligence. This multi sensor is perfect for applications where space is at a premium.
|
|
||
Listed below is a small selection from our wide range of custom sensor solutions, please consult iLight for your specific requirements. |
|||||
Pbox-S Special |
Surface mount box For use with PIR-PE-C-12v, PIR-W-EXT-12V, PIR-W-12V & PIR-LR-S-12V |
||||
|
|||||
PIR-PE-C-12V Special |
Low Voltage Combined Photocell and Passive Infrared Detector Low voltage combined Photocell and Passive Infrared Detector with open collector output, suitable for flush mounting to suspended ceilings. PIR Detection range approx 5m from ceiling height 2.4m. May be used for a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft.Daylight sensitivity range at surface 0-1000 lux approx. |
||||
|
|||||
PIR-W-EXT-12V Special |
Low Voltage Exterior Surface Mounted Passive Infrared Detector Low Voltage surface mounted Passive Infrared Detector with open collector output and Photocell threshold level detector, suitable for wall mounting. PIR Detection range 10m max, detection zone 120 degrees. Daylight sensitivity threshold ajusted at unit above approx 10 lux. IP54 rated. |
||||
|
|||||
PIR-W-12V Special |
Low Voltage Wall Mounted Passive Infrared Detector Low Voltage wall mounting Passive Infrared Detector with open collector output and Photocell threshold level detector. PIR Detection range 5m max, detection zone 120 degrees. Daylight sensitivity theshold 100-1000 lux and inactive, adjusted at unit. Interior use only. Fits standard UK single gang back box or surface box ,min 16mm deep. Back box not supplied. |
||||
|
|||||
PIR-LR-S-12V Special |
Low Voltage Long Range Passive Infrared Detector Low voltage long range Passive Infrared Detector with open collector output and Photocell threshold detector for surface mounting. PIR Detection range strong up to 10m,secondary up to 25m max. Direction adjustable horizontal or 45 degrees. Daylight sensitivity 100-1000 lux and inactive, adjustable on unit. Interior use only. |
||||
|
|||||
|
|||||
