iCAN Accessories

In addition to our interfacing tools iLight also provide a number of accessories to further enhance the capability and usability of the iCAN control system.

 

TC-1

Astronomical Time clock
The TC-1 is a surface mounting electronic time clock with astronomical facility and LCD display. It connects to iCAN network and is fully programmable using either the front panel keyboard or iCANsoft™ PC based softeware for daily or date specific events.

  • 255 events
  • 8 sequences with up to 30 steps per sequence
  • Scene selection and programming
  • Channel level raise and lower
  

HH07IR

iLight hand held remote

  • 7 button IR transmitter
  • Four scenes, off, raise and lower

 

      

iCANPronto

iCAN Pronto Software
iCANpronto is a unique program designed for use with a Philips Pronto or Marantz Universal Remote controls. The program allows control and scene programming of each area of an iCAN system via the control panel’s infrared receiver.

  

iCANpda

Pocket iCANsoft
Pocket iCANsoft can be loaded onto a PDA (Pocket PC) to provide wireless control and programming of your lighting scenes

 

 

Presence Detectors
These units allow the iCAN system functions to be triggered automatically. They either detect the infrared radiation given off when somebody enters an area or detect ambient lighting levels and send a signal to the iCAN interface unit (UIG or UIM).

 

PI1C

Ceiling Mounted Motion Detector

  • Passive infrared detector used to detect presence of people in
    an area
  • Designed to be recessed into a ceiling tile and can be installed
    individually in a small room or in groups to
  • Mounting hole cut out Ø 38m
 

PE1C

Ceiling Mounted Photocell

  • Photocell used to determine light level in an area
  • Designed to be recessed into a ceiling tile and used to govern
    daylight linking light level
  • Mounting hole cut out Ø 38mm

 

        
PE1EXT

External Photocell

  • Mounted in an IP65 housing
 

SW2

Software Accessories
This unit allows engineers to connect their PC to the iCAN system and configure the network using iCANsoft.

PC Node

  • PC Node - Serial Port to iCAN network interface
  • Includes a copy of iCANsoft on CD to allow the iCAN network to be configured from a PC