Low Voltage Sensors

These standard units allow the iLight system functions to be triggered automatically from a sensor. They either detect the infrared radiation given off when somebody enters an area or detect ambient lighting levels and send a signal to the iLight interface unit (UIG or UIM). All these units are powered from the iCAN network.

PI1C

Ceiling Mounted Motion Detector

Low voltage Passive Infrared Detector with open collector output, suitable for flush mounting to suspended ceilings, includes retaining clip. Detection range approx 5m from ceiling height 2.4m. May be used in groups to cover larger areas. On time duration after trigger fully programmable within iCANsoft. Interior use only.

PE1C

Ceiling Mounted Photocell

Low voltage Photocell Detector, suitable for flush mounting to suspended ceilings, includes retaining clip. May be used as a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range at surface 0-1000 lux approx. Positioned as look down detector, Interior use only.

PE1EXT

External Photocell

Low voltage exterior Photocell Detector, suitable for surface mounting. May be used for a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range approx 0-10,000 lux IP54 rated.

AXCS01SRJ

Combined PIR, Daylight and I/R Sensorl

This low voltage multi sensor combines PIR presence detection and a photocell in one compact flush mounting design using an RJ12 connector on the rear of the unit.

The action of the photocell and PIR presence detector are separate.

Ideal for intelligent lighting control systems that deploy system programmed intelligence. This multi sensor is perfect for applications where space is at a premium.